Verix
Project Summary
Project Status
Walls

Build Wall Info

Describe the wall in plain terms. The system saves it as the source of truth.
Wall Basics
ft in
ft in
Openings
Structural items
Outlets

Project Schedule Library

Upload your window, door, and structural schedules once. After that, Build Wall Info lets you pick a mark (W1, D2, structural Tag 1…) and the details fill in automatically.
Window Schedule
Door Schedule
Structural Schedule
Shear walls and strong walls. The Complete Source Table below is the source of truth — review it, correct any value, then save. Schedule notes follow it.
Schedule Notes
Notes attached to this schedule appear here — extracted from the plan when found, or added by you. (Shown on plywood shear walls only, not Strong Walls.)
Advanced: Derived Verification Fields
Simplified fields Add Wall Info and verification use. When a Complete Source Table exists above, these are derived from it automatically and shown read-only.

Engineer Details

Every structural detail extracted from your current plan set — tap one to open its page and place it. This is the source Verix uses to fill in what each tag requires.

Offline Verification

Photos saved offline or with "Save to Verify Later" wait here until you continue. Continuing runs the normal verification on the server.

Verification Summary

Loading…

New Inspection Point

Create a field verification task. The runner will complete it on site with photos, comments, and a status.
📍 Position selected
1 · Task
2 · Required Evidence
3 · Preview for Runner
Required Evidence
Verix uses AI and user-provided data to assist with field verification. Always review the information before relying on it for construction decisions.

🏗 Wall Verification

Choose how you want to verify this wall.
📐 Verix Mode
Precision
Use Verix Mode when the wall fits in one regular photo. This mode is designed for precise opening verification, dimensions, and exact plan-vs-site comparison.
🌄 Pano Mode
Field Coordination
Pano Mode is optimized for large walls and spaces that are difficult to capture in one standard image. This mode helps verify that openings are present and generally positioned according to the plan.
1. Photo
2. Wall
3. Openings
4. Result

📸 Take Photo

Take a new photo with your camera, or upload an existing one from your gallery. Make sure the whole wall is visible.
✓ Photo
2. Wall
3. Openings
4. Result

📐 Adjust Wall Corners

👆 Corner = move one corner
White handle = move whole edge
Outside wall = scroll
Magnifier shows exact position
✓ Photo
✓ Wall
3. Openings & Structural
4. Result

Adjust Objects

Adjust object locations before verification. Drag any object to reposition it.
Detected Openings
Structural Verification
After adding an item, adjust its position on the image before running verification.
Outlet Verification
After adding an item, adjust its position on the image before running verification.
✓ Photo
✓ Wall
✓ Openings
4. Result
🌄 PANO MODE

Field Coordination Review

Pano Mode: measurements are approximate.